Click Here to visit US site.

1-888-737-0907
[email protected]

Penergetic Canada
  • About
  • Products
    • Crop Production
    • Manure Management
    • Feed Additives
    • Water Management
  • CROP APPLICATION
  • TRENDING / VIDEOS / REPORTS
  • Trials / Results
  • Dealers / Distributors
  • Contact
  • Menu Menu

The AquaKat uses Penergetic biostimulation properties to vitalize and restructure water. The AquaKat product series is used for the vitalization and structuring of drinking and process water.

The AquaKat causes water particles to vibrate and stimulates a vortex movement. As with water in a mountain spring, the water particles restructure themselves and regain the properties of natural and fresh spring water.

APPLICATIONS

  • Residential
  • Commercial/Industrial
  • Agricultural

click to enlarge

≈ no magnets, no electricity, no chemicals used, no on-going operating costs ≈

WHAT IS WATER?

Water is an irreplaceable natural resource and the source of all life on earth. It is a tasteless and odourless, clear and colourless fluid, which consists of two of the most common elements in nature: hydrogen and oxygen. Besides suspended minerals and organic particles in soluble form, natural water also contains various gases (e.g. oxygen) and solids (mineral nutrients).

Water is also a storehouse of information. Water contains imprinted energy oscillations, or information, which, amongst other things, influences homeostasis (the body’s own regulatory system).

FUNCTION AND RESONANCE EFFECT

The AquaKat® is a water revitalization device that emits subtle information patterns which have the effect of changing the characteristics of water. In the same manner as a catalytic converter in a car changes harmful pollutants into less harmful emissions, the AquaKat® changes the nature of water by transmitting specific frequency patterns to it. Charged information in the AquaKat® causes water to resonate at a specific frequency (much like a tuning fork when struck will cause a nearby stationary tuning fork to also start resonating).

Based on our understanding of water’s ability to store and emit information, the following can be deduced regarding the effect of the AquaKat: It alters the “memory’ of the water by changing the clusters within it, so that the information patterns of tap water adopt an oscillation identical to that of the AquaKat® (see graph below). Water revitalization with an AquaKat® increases water’s vitality, gives it a softer feel and improves its taste. Water filtration and reverse osmosis systems will cleanse water of various substances: chemical, heavy metal and organic contaminants. Unfortunately, they do not restore the energies and information related to them nor do they restore the vitality (life) to water – necessary in activating water’s natural healing abilities.

Application Overview

  • Water revitalization
  • Dissolved minerals in water are readily available.

Technical Solutions

  • Dissolves/prevents lime build-up on pipes, plumbing fixtures and appliances
  • Stabilization hardness and homogenization lime in water
  • Less aggressive and less corrosion, protects against rust
  • Increased solubility capacity of water to absorb dissolved substances

Other Benefits

  • No change in the water composition
  • No plumbing required to install
  • No maintenance or operating costs
  • No magnetism, no electricity, no chemicals and not susceptible to frost damage
  • May be used on copper, PVC, plastic or metal water line
  • No direct contact, with the water when fixed to the outside of the pipe

Range of Uses

  • Individual faucet, water tap outlet or showerheads
  • Private household,
  • Mobile home, recreational vehicle, cottage/recreational property
  • Apartment buildings
  • Community water supply system
  • Agricultural use (e.g. poultry / livestock watering, processing water, on sprayer equipment, composting)
  • Industrial uses (e.g. processing and cooling operations, metal fabrication, recirculation water use)

APPLICATION/USES

Click on AquaKat type name below to reveal uses

AquaKat S

  • Individual tap or shower head
  • When travelling (e.g. hotel/camping)
  • Personal use

AquaKat M

  • apartment/small condominium
  • recreational cabin/cottage
  • hot water heater

AquaKat L

  • standard-sized house (e.g. 1 or 2 families)

AquaKat 1”

  • residential use (smaller single family unit)

AquaKat 2”

  • residential use – match to scale of daily water usage
  • Agricultural applications

AquaKat 8+

  • agricultural operations (e.g. livestock watering system, crop production, greenhouse, spraying)
  • commercial/industrial operations

DESIGN PARAMETERS

Model Daily Water Volume Distance
in liters in US gallons in meters in feet
AquaKat S 100 25
AquaKat M 750 200 20 66
AquaKat L 3,000 800 80 260
AquaKat XL 6,000 1,600 120 520
AquaKat XXL 30,000 8,000 240 1,040
AquaKat 1″ 2,000 530 60 200
AquaKat 2″ 12,000 3,200 180 580
AquaKat 8+ * See AquaKat 8+ Design Paramaters table which follows

Note:

AquaKat may also be placed in sequence to increase the system capacity (see photo showing three AquaKat 2+ in sequence on a pipe). Also mounting multiple device exponentially increases the effect.

MULTI-UNIT PERFORMANCE INFO SHEET

Three (3) AquaKat 2″ in Sequence on a Water Pipe

AquaKat 8+ Design Parameters.

All numbers calculated based on 8 bar water pressure.

INSTALLATION

The AquaKat® is easy to install. No plumbing is required. The AquaKats may be fitted onto all pipe materials.

Ideally, an AquaKat® should be placed on to the water line close to where it first comes into the dwelling or premises it is intended to service, except it should be placed after a water pressure tank or water softener (if either is present).

AquaKat S

This, the smallest unit, comes with a Velcro strap that can be used to affix it to a water pipe (e.g. under the sink), in the bathroom (e.g. on a shower fixture) and/or on a faucet or tap. The small AquaKat® is also well suited for travelling, for use in hotels or recreational vehicles and for use in conjunction with a water filtration or reverse osmosis system – in which case it should be placed after these devices.

AquaKat M, L, and XL

These devices can simply be strapped (with plastic cable ties) onto the main intake water pipe.

AquaKat 1” and AquaKat 2”

Just 6.5” (16 cm) of free pipe segment is required to install an AquaKat 2” [The smaller AquaKat 1” requires even less room].

These devices are comprised of two interlocking semi-circular halves. The two halves are fitted around the water pipe and snapped together. Foam fitters (which are provided) are then placed at each end to center the AquaKat® around the pipe and hold it in place.

Assembly Instructions

Things to be Aware of

Initially, possible release of limescale particles

  • Flush pipes after 6 – 8 weeks
  • Avoid electromagnetic fields
  • Do not paint the AquaKat or stick anything onto it
  • Do not dent or puncture the AquaKat
  • Position on the pipe so that there is no contact between the AquaKat and any
    other surface (e.g. floor, wall, ceiling, other equipment)

Should you have any question respecting the property installation and use of the AquaKat, please contact your AquaKat distributor for assistance.

AquaKat 8+

A 10 inch (25 cm) long, straight and free pipe segment is sufficient for the installation of the AquaKat 8+ (or larger unit). Foam (provided) is used as a spacer and anti-slip device between the pipe and the AquaKat 8+, which can then be locked in place (locks provided).

In cases where pipe size and water capacity warrant the expansion in the size of the
AquaKat 8+, addition module extensions can be added (as shown).

Addressing Lime Build up and Rust in Water

One benefit of water revitalization with the AquaKat ® is that lime build-up inside water pipes becomes dissolved and does not re-form. The reason for this is that the water regains its natural capability to hold dissolvent mineral substances as microscopic particles – 200 to 300 times smaller than before (the diagram opposite illustrates the difference).

This means that lime does not build up on pipes, in hot water tanks, hot water heating systems, appliances or in commercial, industrial or agricultural operations, especially where water is recirculated or heated.

Similarly, rust in pipes can be dissolved and then washed away like other substances in the water, instead of accumulating or staining fixtures.

Microscopic examination has shown that practically no coagulated crystals form under the influence of the AquaKat®. Instead, small round and isolated singular crystals are formed that have the additional effect of stabilizing the hardness of the water.

In another comparison, the crystal scientist Dr Elmar Langenscheidt has re-tested the well-known crystallization behaviour of ascorbic acid. In water that was informed by the AquaKat®, ideal typical uniaxial crystals are formed. Their centre is clearly recognizable. It becomes the centre of a radial corona of interference colours, which indicates a closed crystal structure.

Hard water versus soft water

It is widely accepted that good quality drinking water is an essential and healthy part of our daily diet. The minerals that it contains, such as potassium and magnesium, are also part of the water and give it its good taste. Calcium is also part of this; however, it can have side effects. It may be good for the human body, but the buildup of calcium (lime scale) in pipes, in hot water tanks, on plumbing fixtures, kettles, etc. can cause significant problems and costs.

What most people do not realize is that water that is too soft can also cause damage – by corroding metals and metal surfaces. Rust can eat away on the inside of pipes. Lime can therefore be useful, even important. Just to get rid of it means also to give up its protective properties.

This is why water experts recommend leaving the valuable calcium in the water! Modern water treatment techniques and systems, such as AquaKat®, work on the calcium in such a way that prevents it from settling as harmful lime scale, while allowing it to retain its protective properties.

Hard water
Soft water
Disadvantages

  • calcium (lime scale) build-up
  • higher energy consumption (hot water)
  • reduced operating capacity (clogged pipes and fixtures)
  • damaged appliances (hot water heater, kettle, coffee maker, dishwasher, etc.)
Disadvantages

  • corrosion and rust
  • aggressive water (pitting)
  • dissolves heavy metal from pipes (e.g. copper)
Advantages

  • protection from corrosion and pitting
  • better taste (mineral present)
  • water with a “grip”
Advantages

  • enhanced solubility
  • reduced detergent/soap required
  • no calcium (lime scale) build-up

AquaKat and Agricultural Use

Water vitalization with an AquaKat may have positive effects in agriculture.

As shown in the simple experiment below, when wheat kernels are soaked in AquaKat water vs. regular tap water there is a significant difference in the germination rate with AquaKat treatment.

As shown in the following images, using AquaKat water on plants and crops promotes better plant growth, better nutrient uptake, increase production/yield and higher quality (including an elevation in Brix)

AquaKat and Field Sprayers

Farmer observations when AquaKat water used in spraying:

  • produces finer droplets (instead of a mist) so spray less inclined to drift/blow off
    course [Sprayer operators report is much easier to see the spray.]
  • provides for better ground coverage
  • can run sprayer boom lower down
  • water consumption rates may be reduced
  • more even spray pattern achievable

RESULT: COST SAVINGS AND BETTER SPRAY PERFORMANCE POSSIBLE.

Note: variation in farm, sprayer equipment and water can influence on-farm results.

OPTION FOR USING AN AQUAKAT FOR SPRAYING:

1) AquaKat may be affixed to sprayer boom or
2) AquaKat water (from water truck or storage tank) may be used

Satisfaction Guarantee

The AquaKat has been in use in Europe for about twenty-five (25) years.

Nonetheless, every AquaKat sold in North America comes with a:

  • 60 day money back satisfaction guarantee *
  • 5 years warranty on workmanship –
    * Applicable if you are not completely satisfied with how the AquaKat performs.
    Subject to water unit and box being returned in good condition.

INFORMATION DOWNLOADS

For more information the following downloads are available:

Performance of AquaKat devices
AquaKat 8+ Installation Mini Booklet

Our Products

  • Crop Production
  • Manure Management
  • Feed Additives
  • Water Management

Penergetic @2019 | website by: Whistler Web & Print

Scroll to top